How To Set Tire Pressure For Volvo Vehicles

Tire pressure is a crucial part of the performance and handling of your car. It can also affect gas mileage because it affects how effectively your tires roll over the road. But there's more to tire pressure than just getting the proper air in your tires. Here's how to find that perfect pressure:

Step 1: Find Your Max PSI

Find the maximum PSI recommended for your vehicle. In some cases, this will be different for each tire, and the car may have a different recommended standard than the ultimate, but it's always best to start at the top. 

Set all tires to their respective pressures as listed on their separate tire pressure label (this is often located inside of a door jamb). If you're having trouble finding where your specific vehicle's labels are located, check your owner's manual or simply set them to what your owner's manual says they should be set at-you don't want to risk damaging your tires by using incorrect pressure levels! 

Step 2: Find Your Manufacturer's Recommended Pressure

Most manufacturers recommend a tire pressure of 35 PSI. If your tires are under or over-inflated, they will wear out faster. It is essential to check the manufacturer's recommended pressure because it can change depending on your car's model. 

Step 3: Check the Temperature of the Tire

Since heat is a significant factor in how much air pressure is required to keep your tires properly inflated, you need to check tire pressure when the tires are excellent. This can be done by checking them in the morning or evening, but make sure they've been sitting for at least an hour so that they have had time to cool down. Suppose you are checking the pressure on a hot day. In that case, you should wait until after dark-temperatures can drop significantly overnight, and most people don't drive their vehicles with low tire pressures during those times of the day. 

Step 4: Measure Your Tires' Current PSI

To check the pressure of your tires, you'll need a tire pressure gauge. This tool is typically used to measure the air pressure in your car's tires. To get an accurate reading, start by removing all caps from the valve stem of each tire and take note of how much air is in there now (the current PSI). 

Once you've removed all caps from the valve stems, attach your tire gauge and pump up each tire until it reaches its recommended PSI level (see below). You may need to repeat this step for some vehicles. Different manufacturers have different recommendations for what high or low inflation levels should be depending on temperature and other factors. 

Step 5: Add Air (or Let Some Out)

Now that you know what pressure your tires should be, it's time to add or let out the air. 

If your tire is low, you will need to add air. To do this, use an air compressor or an air pump that plugs into the car's cigarette lighter. Some pumps are manual, and others are automatic. 

If using a manual one, turn on the pump and then unscrew the chuck (the part where you put in the hose). Place it over your tire valve and give it a few pushes until most of the air from inside has left through another valve on top of this one. Replace this cap with another chuck attached to a long hose so you can reach other tires easily without having to bend down too much while filling them up with additional pressure as needed-this could take some time, depending on how much pressure is currently inside each tire! 

Step 6: Recheck It in Cold Temperatures

Recheck the tires in cold temperatures (i.e., when they are at or below freezing). Add air to the tires if necessary, and then repeat steps 3 through 6 until you have reached your desired tire pressure. 

Get Your Dream Car Today

Head down to Boston Volvo to get your dream car! We offer new and used Volvo vehicles so that you can choose from an expansive inventory available. You can find the vehicle of your dreams in our showroom or online, so stop by today!